Short answer: a Tesla custom wrap is a PNG image painted onto a template of your car, loaded into the touchscreen's Paint Shop. Save the image at 512x512 to 1024x1024 pixels, no larger than 1 MB, put it in a folder named Wraps at the top of a USB drive, plug the drive in, and open Toybox → Paint Shop → Wraps. You can also upload from the Tesla mobile app.
This page covers the 3D car on your screen. It does not cover a physical wrap on the body of the car. Every Tesla-specific rule below comes from Tesla's own repository, teslamotors/custom-wraps, which is the closest thing to a spec Tesla publishes for wraps. We link to it wherever we use it.
What is a Tesla custom wrap?
Paint Shop is the area of the touchscreen where you change how your car looks in the on-screen 3D visualization. A custom wrap is your own design applied to that model. Tesla's repository describes it as personalizing the car's appearance in the Paint Shop with your own designs.
You build the design on a flat template. The template is a PNG with the car's body panels laid out, and you fill in the white areas. Tesla provides one template per vehicle, listed below.
Customize your Tesla lock sound
Browse 2,700+ sounds, instant preview and free download.
How do I make a custom wrap?
- Download the template for your exact vehicle from the custom-wraps repository. Each folder holds the template and example wraps.
- Open the template in any image editor and fill in the white areas with your design.
- Save the result as a PNG. Keep the template's size where you can: the README says to use the template size for best results.
- Check the image against the rules in the next section.
If you would rather not use an image editor, tesla-wrap.design is a free browser studio for the same PNG files. It is independent and is not a Tesla product, so check its output against the rules below before you copy it to a drive.
What are the image rules?
Tesla's README sets these limits:
| Rule | Limit |
|---|---|
| Format | PNG |
| Resolution | 512x512 to 1024x1024 pixels |
| File size | 1 MB or smaller |
| File name | letters, numbers, underscores, dashes and spaces only, up to 30 characters |
| File count | Up to 10 from the mobile app and up to 10 from a USB drive |
An image that breaks any of these is the most likely reason a wrap never shows up.
Which template do I need?
The README has a separate template for each of these vehicles. The three newer Model Y trims and the two newer Model 3 variants each get their own folder, so pick the one that matches your car's year and trim.
| Vehicle | Template folder |
|---|---|
| Cybertruck | cybertruck |
| Model 3 | model3 |
| Model 3 (2024+) Standard and Premium | model3-2024-base |
| Model 3 (2024+) Performance | model3-2024-performance |
| Model Y | modely |
| Model Y (2025+) Standard | modely-2025-base |
| Model Y (2025+) Premium | modely-2025-premium |
| Model Y (2025+) Performance | modely-2025-performance |
| Model Y L | modely-l |
| Model S (2021+) | models-2021 |
| Model S (2025+) Plaid | models-2025-plaid |
| Model X (2021+) | modelx-2021 |
Tesla's README lists templates, not a support rule. It does not say which software version added Paint Shop wraps or which cars can use them, so check for the Wraps tab in your own car.
How do I load a wrap from a USB drive?
- Format a USB drive as exFAT, FAT32 (Windows), MS-DOS FAT (Mac), ext3 or ext4. NTFS is not supported.
- Create a folder named
Wrapsat the top level of the drive. - Copy your PNG files into
Wraps. - Make sure the drive holds no map update or firmware update files.
- Plug the drive into the car.
- On the touchscreen open Toybox → Paint Shop → Wraps. Your wraps appear on the Wraps tab.
USB drive/
└── Wraps/
├── my-wrap.png
└── second-wrap.png
For the format step in detail, see FAT32 vs exFAT for Tesla USB drives. Our install guide shows the same drive layout next to the lock sound folder.
Can I use the Tesla app instead of a USB drive?
Yes. Tesla's README says the mobile app needs version 4.59.0 or later. In the app go to Creations → Wrap → Upload, then apply the wrap in the car from Toybox → Paint Shop → Wraps. The 10-file limit applies to the app and to the USB drive separately.
My wrap does not show up: what do I check?
Tesla's README gives two checks. Work through them in order, then the file rules.
- The drive. It is formatted as exFAT, FAT32 (Windows), MS-DOS FAT (Mac), ext3 or ext4, not NTFS, and holds no map update or firmware update files.
- The folder. It is named
Wrapsand sits at the top level of the drive, not inside another folder. - The image. It is a PNG, within 512x512 to 1024x1024 pixels, at most 1 MB, and its name follows the rule above: letters, numbers, underscores, dashes and spaces only, up to 30 characters.
- The count. You are within 10 files from the drive.
- The menu. Look on the Wraps tab under Toybox → Paint Shop → Wraps.
If the drive itself is not detected, the cause is usually the port. Use a USB port that carries data (the glovebox port on newer cars; rear ports only charge).
Do wraps and lock sounds use the same drive?
They use the same kind of drive and the same area of the touchscreen. A lock sound is one WAV file named LockChime.wav at the top level of the USB drive, set under Toybox → Boombox → Lock Sound. A wrap is a PNG in Wraps, set under Toybox → Paint Shop → Wraps. The two are separate features with separate folders, so changing one does not change the other. Tesla's wraps README does not say whether the two folders can share a drive, so if one stops loading, move it to its own drive.
If you have not customized your car yet, the lock sound is the smaller job: one file, one folder. Start with the complete lock sound guide, then browse the free lock sound library.
Frequently asked questions
Where do I put custom wraps on a USB drive?
In a folder named Wraps at the top level of the drive, as PNG files.
What size should a Tesla custom wrap be?
512x512 to 1024x1024 pixels, and no larger than 1 MB. Tesla says to use the template size for best results.
How many custom wraps can I add?
Up to 10 from the mobile app and up to 10 from a USB drive.
Can I use NTFS for the drive?
No. NTFS is not supported. Use exFAT, FAT32 (Windows) or MS-DOS FAT (Mac). ext3 and ext4 also work.
Where do I find my wrap in the car?
Toybox → Paint Shop → Wraps.Do I need a template?
Tesla provides one for each vehicle so your design lines up with the body panels. Download the one for your model and trim.
Is this a physical wrap?
No. It changes the 3D car shown on your touchscreen.
Browse free Tesla lock sounds → for the one-file customization that uses the same USB workflow.


