Model Y compatibility by year
Custom lock sounds have worked on every Model Y since the Boombox feature launched. What changed with Juniper is the USB connector and which port the car treats as a data port versus a charge-only port.
| Model Year | Refresh | Primary USB port | Boombox path | Supports custom lock sound |
|---|---|---|---|---|
| 2024–2026 | Juniper | USB-C (front console) or glovebox data port | Toybox → Boombox → Lock Sound → USB | Yes |
| 2021–2023 | Standard | USB-A (front center console) | Toybox → Boombox → Lock Sound → USB | Yes |
| 2020 | Launch | USB-A (front center console) | Toybox → Boombox → Lock Sound → USB | Yes |
If your front console port only charges and never shows a drive in Boombox, use the glovebox data port instead.
Step-by-step install
Every sound you download from our library is already named LockChime.wavand formatted to Tesla's 44.1 kHz / 16-bit WAV spec. You just need to put it in the right folder.
Format your USB drive
Create the folder structure
Boombox. Place your LockChime.wav inside it. The final path should be:USB_DRIVE/
└── Boombox/
└── LockChime.wavPlug into the correct port
Select the sound via Boombox
- Tap Toybox
- Tap Boombox
- Tap Lock Sound
- Select USB
Note: Lock Confirmation Soundunder Controls → Locks is Tesla's stock chirp setting — that is not the same thing. The Boombox menu is what reads your custom file.
Verify
For the full model-agnostic walkthrough with photos, see the Tesla lock sound installation guide.
Top 5 sounds for Model Y Juniper owners
The Juniper's external speaker has a clean mid-forward response — short, punchy sounds land especially well. These are the five most-downloaded right now. Preview before you download.
Internet Culture
Retro Gaming
Troubleshooting
Tesla isn't seeing my USB drive in Boombox
On Juniper, the front console ports may act as charge-only for Boombox. Move the drive to the glovebox data port and reopen Toybox → Boombox. Also confirm the drive is formatted as FAT32 or exFAT — APFS from a Mac will not be detected.
Car still plays the default chime
Re-open Boombox and confirm the Lock Sound source is set to USB, not Default. Also make sure you're not only toggling Lock Confirmation Soundunder Controls → Locks — that controls Tesla's stock chirp, not your custom file.
File format or volume issues
Every sound from our library is pre-formatted as a 44.1 kHz / 16-bit PCM WAV, volume-normalized for Tesla's external speakers. If you're using your own file and it sounds wrong, run it through our audio converter to export a Tesla-compatible version.
Sound resets after a software update
Tesla occasionally resets Boombox settings after an OTA update. Keep your USB drive in the car (or in a handy spot) — just re-select USB in Boombox after the update completes. For full context, see why Tesla lock sounds reset after an update.
See also
More guides in the refresh series:
- Model 3 Highland (2024+) lock sound guide— USB-C glovebox port, folder path, and best sounds for Highland
- Cybertruck custom lock sound guide— Front USB port setup and Boombox/LockChime.wav path for Cybertruck
- Model S custom sounds guide— Plaid-compatible install steps and recommended sounds
- Full Tesla lock sound installation guide— All-model reference hub with USB format, folder structure, and troubleshooting
- Best Tesla Model Y lock sounds— Curated picks that work great on the Juniper speaker
Written by
TeslaLockSound Editorial
TeslaLockSound